Simrad Axis 200 Manuel de service télécharger pdf (Page 213)

Simrad EK 500 / EY 500

P2260/E 17

3 THE LOBE CALIBRATION PROGRAM

3.1 UNPACKING AND STARTUP

This software package greatly simplifies the task of determining the optimum

transducer pattern parameters to be used in the EK 500/EY 500 Transceiver

Menu. The program runs on IBM PC/XT/AT’s and compatibles. It is strongly

recommended to have a mathematics coprocessor (8087/80287/80387) installed

in the computer to speed up the estimation and plotting algorithms.

This software is distributed free of charge to all Simrad EK 500/EY 500

customers. A self-extracting archive contains

- C source code files

- makefile for automatic compilation/linking

- the executable lobe calibration program

- example transducer measurement data files

- archive program with user’s manual

- this manual (manual.doc)

The C source code was compiled with a Borland Turbo C++ 1.01 compiler.

The procedure for unpacking the archive files is straightforward. Insert the

Simrad distribution diskette in the A drive. Create an empty directory on the

hard disk and copy the archive file to the empty directory. Move to the new

directory and execute the self-extracting archive program.

mkdir lobedir

copy a:*.* lobedir

cd lobedir

lo950117.exe (or older version with different date)

After completion of the archive program the "lobedir" directory contains all the

unpacked files.

To start the lobe calibration program, type

lobe.exe

at the DOS prompt. The function keys F1 to F5 select different operational

menus.

F1. To quit the lobe calibration program.

F2. Serial port 1 is used for communication with the EK 500. For the EY 500

connect to the serial line on the PC and set /Utility/Com1/Com2 Switch = On)

This menu sets the communication parameters. The RS232 cable coupling

diagram is shown on the computer display.

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 231 232

Pas de commentaire

Simrad Axis 200 Manuel de service Page 213