Simrad Navico WP10 Manuel d'instructions télécharger pdf (Page 11)

In all cases, the autotack is confirmed by a long beep, with the

relevant Port or Starboard LED flashing during the course

change.

2.5.3 Autotacking in Nav mode

As the Wheelpilot will be steering directly to a waypoint, the

autotack facility is disabled while in Nav mode.

If it is necessary to perform an autotack, disengage Nav mode

by pressing the NAV key, then perform the autotack.

WARNING Ensure that the boat is on the correct tack before re-engaging

Nav mode.

Instruction manual

E04596

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Pas de commentaire

Simrad Navico WP10 Manuel d'instructions Page 11