Simrad AP25 Manuel d'instructions télécharger pdf (Page 133)

Configuration and setup

20221495F 131

Under Service in the Installation

Menu, select NMEA port test by

pressing the STBD button and

confirm this by rotating the course

knob clockwise.

Verify that the hardware is OK. If

not, replace the corresponding

PCB(‘s).

Proceed to the Simnet Setup menu by pressing the STBD button,

or press STBY to return to normal AP25 operation.

Simnet setup

Group selection

SIMRAD: Autopilot is part of the

Simrad Group. Source selection will

be common for the products in the

group (synchronized).

STAND ALONE: Source selection

for the autopilot will not be

transferred to other products in the

Simrad Group (no synchronization).

Backlight Illumination

Set backlight to synchronize with

one of the illumination banks (1-3)

available on the SimNet, or to

STAND ALONE for individual

control of the autopilot illumination.

Instance number

An item to identify units by a

number when the autopilot is

connected to a NMEA2000

Network. On SimNet units the

Instance number is added to the

product name e.g. AP25-1, AP25-2

for easy identification on various

display screens.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 171 172

Pas de commentaire

Simrad AP25 Manuel d'instructions Page 133