Simrad AP25 Manuel d'instructions télécharger pdf (Page 54)

Simrad AP25 Autopilot

52 20221495F

The ‘Nav/Wind’ parameter can be set in the User Setup or in the

Quick setup. Quick setup is activated after by quick double press

on the NAV WIND button.

‘WIND Apparent’ is selected when you only want to steer to

apparent wind. Apparent wind steering is preferred when you

want to achieve maximum boat speed. The autopilot will try to

maintain a constant apparent wind angle to get maximum thrust

from a given trim of the sails.

‘WIND True’ is selected when you only want to steer to true

wind. When sailing in closed waters, the apparent wind angle

may change temporarily due to wind gusts. It may then be

preferred to sail to the true wind.

Thruster

(only available if a thruster is connected as displayed by the

thruster icon).

By this parameter the thruster is turned on and off. When the

thruster is turned on, both thruster and rudder are used for

steering. If the boat speed exceeds 6 knots, the thruster steering

is automatically disabled.

Reset trip

The trip log is reset by rotating the course knob.

User setup 2

This is a second set of user settings that normally

not need to be changed during day to day use. To

activate User setup 2, turn the course knob

clockwise.

Source Select

Provides you with automatic or manual selection of interfaced

data sources for heading (Compass), Navigation, Position, Wind

Angle, Calculated Wind, Water speed, Water temperature,

Distance log and Depth.

Wind-C (calculated) is a common term for true wind and wind

direction.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 171 172

Pas de commentaire

Simrad AP25 Manuel d'instructions Page 54