Simrad AP25 Manuel d'instructions télécharger pdf (Page 25)

Operation

20221495F 23

Transition Speed set to 9 Knots

Transition to LO parameters

with increasing speed: 10 Knots

Transition to HI parameters

with decreasing speed: 8 Knots

Speed

Sailboat

When sailing in WIND mode, the parameters are automatically

changed by the direction of the wind as per below or by the boat

speed.

The transition between HI and LO parameters and vice versa

will have a different characteristics with regards to the wind

angle compared with the transition controlled by the speed of the

boat.

If you loose too much speed e.g. when tacking, the parameters

will change to HI to gain sufficient rudder response. This should

be observed when setting the transition speed on sailboats.

2.10 Manual Selection of HI/LO Parameters

Manual selection of HI/LO parameters is necessary if there is no

speed input to the autopilot or if you want to override the

automatic control.

To toggle between LO and HI parameters, press the "AUTO"

button two times quickly.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 171 172

Pas de commentaire

Simrad AP25 Manuel d'instructions Page 25